User's Manual

MHPTV TX User Manual
MHPTV-USR-DOC-V3.0, 10/18/2019 Page 102 of 148
3. Click to AUTO-GAIN-PHASE section on the left. Then on the right lower
corner, click ALL to run.
4. After Optitune is done, check all rejected power to see if they are within the
desired range. If not, you can rerun Optitune again for optimization.
5. Raise the transmitter power level back to your desired level.
Note: On the web interface it shows more readings/settings in the AUTO-GAIN-
PHASE section. They are for manufacturer used. Please leave them untouched, or it
may affect the Optitune performance.