User's Manual

MHPTV TX User Manual
MHPTV-USR-DOC-V3.0, 10/18/2019 Page 107 of 148
“REJT” value in the HOME screen will show the highest one (the one which
is the closest to the preset threshold).
 VSWR: Voltage Standing Wave Ratio
 REJT: This is the system Reject Load Power Meter, derived from the REJT
Load feedback sample. Displayed in units of “W” and cannot be changed.
 Status Bar: During normal operation, the default status is “RUNNING OK”. If
there is an alarm, the alarm will show up in the Status Bar of each screen.
 Block Diagram: Press the “Exc A/B” graphic to navigate to the Dual Exciters
Switching screen (shown below). This screen shows which exciter is currently on-
air (highlighted GREEN) and allows the user to manually change the on-air exciter.