User's Manual

MHPTV TX User Manual
MHPTV-USR-DOC-V3.0, 10/18/2019 Page 39 of 148
1.3 TX Specifications
 RF Output
 Connector: 1 5/8” (1, 2, 3, 4 or 5 PA), 3 1/8” (6 or 8 PA), 50 Ω
 Frequency: 470~610 MHz, in steps of 1 Hz
 Rated Power (after BPF): 1.1, 2.2, 3.3, 4.4, 5.5, 6.6, 8.8 kW (rms) (ATSC)
 Level Stability: < ±0.2 dB
 MER: > 35 dB
 Amplitude Flatness: < ±0.5 dB
 Shoulder Level: < - 50 dB (after correction)
 Return Loss: > 16 dB
 Environment
 Operation Temperature: 0 ℃ ~ +40 ℃
 Operation Humidity: < 95 % (non-condensing)
 Atmospheric Pressure: 86 kPa ~ 106 kPa
 Power Supply
 Voltage: 240 VAC 1-phase, 208VAC 3-phase
 Frequency: 50/60 Hz
Note
1. The electrical interface characteristics are measured under normal conditions.
Values may vary.
2. Operating in abnormal conditions may result in damage to the equipment.
Long operating hours in severe environments may reduce the reliability of the
entire system, which may cause permanent damage to equipment. Make sure
all electrical interface characteristics and environmental parameters are within
the defined range listed above before operating this equipment.