User's Manual

MHPTV TX User Manual
MHPTV-USR-DOC-V3.0, 10/18/2019 Page 40 of 148
1.4 AC Power Requirements
Please review the safety WARNINGS on page 4 of this manual before proceeding
with any electrical work.
A licensed Electrician is required to properly and safely connect the AC mains
power cable from your station's electrical panel to the terminal block located inside the
TX AC Mains Distribution compartment in compliance with local electrical and
building codes. Please note: a power cable is not provided with the Transmitter system
and should be obtained via your local Electrician.
Be sure the Main Breaker on the lower left front of the TX is turned OFF before
performing any electrical work on the TX (as shown below).
Main Breaker OFF