User's Manual

MHPTV TX User Manual
MHPTV-USR-DOC-V3.0, 10/18/2019 Page 52 of 148
1.5 RF System Connections
If you purchased an Anywave BPF, Anywave will install the BPF either on top of
the TX cabinet (as shown below) or standing on the floor, according to the transmitter
and the BPF’s dimension, unless it is specified with order. If it is installed on top of
the TX cabinet, four metal stand-offs “feet” with mounting hardware are supplied
with the BPF to allow it to be fastened and secured to four holes located in the top
panel of the cabinet. Please reference Section 3 “Installation/Initial Turn-On” for step-
by-step instructions on setting up and connecting your RF System components.
BPF on top of the TX cabinet:
Mount BPF
Connect Elbow,
Directional Couplers,
Attenuators and Exciter
feedback cables