User's Manual

MHPTV TX User Manual
MHPTV-USR-DOC-V3.0, 10/18/2019 Page 64 of 148
2.2 Digital Exciter
Front Panel
 LCD:
40×2 LCD with power-saving backlight
 6 Buttons:
Left, Right, Up, Down, OK, ESC
 6 LEDs:
When in Exciter mode:
 LED_TS1: Green light on indicates TS1 is selected and the input TS signal
is OK
 LED_TS2: Green light on indicates TS2 is selected and the input TS signal
is OK
 LED_TSErr: Red light on indicates the selected input signal has an error
When in Translator mode:
 LED_ TS1: Green light on indicates the synchronization of the input RF
signal is OK
 LED_TS2: Green light on indicates the equalization of the input RF signal is
OK
 LED_TSErr: Red light on indicates there is synchronization error or
equalization error
In both Exciter and Translator mode:
 LED_ GPS: Green light on indicates GPS connected and locked
 LED_ RFON: Green light on indicates system ready and RF on
 LED_ SysErr: A flashing red LED indicates the presence of a system error
A solid red LED indicates the unit is in "Local (LCL)" control mode, and when
this LED is off, this indicates that the unit is in "Remote (RMT)" control mode
 1 BNC connector:
 RFMON: Reserved