Use and Care Manual

ANYWHERE FIREPLACE™

The high style and distinctive contemporary design of the Anywhere Fireplace™ allows the ambiance of a fire to be enjoyed in

any room, garden or patio. It is ventless, requiring no chimney or gas line because it uses clean burning bio-ethanol liquid fuel that

is smokeless, odorless, and leaves no soot or ash. You can place the Anywhere Fireplace™ in your house, condo, apartment,

terrace, garden, office or restaurant. It is sure to match most any décor and adds a rich warm atmosphere to your bedroom, living

room, den, dining room… This unique, impressive, eco-friendly modern answer to the fireplace creates a bright yellow, orange and

red flame, spreading cheerful glow across the room. It is non-toxic, non-polluting, has no messy clean up and is virtually free of

maintenance. One liter of fuel can burn for up to 5 hours.

www.anywherefireplace.com

Devco LLC

Larchmont, NY 10538

This product has been designed for your

enjoyment. Please carefully read all warnings

and installation instructions before use.

Model: Madison Model # 90206

For any questions related to parts or installation visit us on the web at www.anywherefireplace.com or email us at

info@anywherefireplace.com

QUESTIONS

INCLUDED ITEMS

FIREPLACE BASE (A)

x 1

SUPPORT ROD (D)

x 2

BURNER HANDLE (H)

x 1

GLASS PANEL (B)

x 2

FUNNEL (I)

x 1

RUBBER FLOOR

PROTECTOR (G)

x 2

BLACK SCREW (E)

x 4

TRANSPARENT

WASHER (F)

x 4

BURNER (C)

x 1

PAGE 1
www.anywherefireplace.com Devco LLC Larchmont, NY 10538 This product has been designed for your enjoyment. Please carefully read all warnings and installation instructions before use.
PAGE 2
WARNING The Anywhere Fireplace™ is ONLY to be used with BIO-ETHANOL LIQUID FUEL FOR FIREPLACES. The bio-ethanol fuel is a flammable product that requires strict adherence of the safety instructions.
PAGE 3
ASSEMBLY INSTRUCTIONS We suggest you assemble your fireplace on a carpeted surface or on a towel to avoid any scratches to your floor or fireplace. Please disassemble Rods (Part D) from fireplace body (Part A) by removing the screws and rubber washers (Parts E/F) before beginning assembly steps below.
PAGE 4
Step 5 Attach clear rubber floor protectors (Part G) to bottom the fireplace glass and turn it upright. If rubber is longer than the glass, you can cut this to length with a scissor. This is to help protect the glass when standing. Step 6 Insert burner in the rectangular recess in the center of the fireplace frame. NOTE: Your burner contains white fiberglass wicking material inside it.