Instruction Manual

Step 2
Using a 3/8” drill bit, drill holes into the wall on the 4 spots where you marked the bracket hole locations.
Step 3
Insert the wall anchors flush into holes in wall as shown in step 3. A light tap with a hammer might be necessary to
insure it is inserted flush with the wall. If you drill a hole into a wooden stud, the wall anchor is not necessary.
NOTE: The wall anchors provided are intended to be used in drywall. If mounting on another wall surface, make sure
you have the proper mounting hardware.
Use a level to mark a straight line with a pencil on the wall where you will mount the bracket. The wall should be made
from drywall, tile, brick, stone, ect. It must not be flammable (e.g. no wallpaper or wood) Make sure you mount the
fireplace at least 4 feet away from any drapes or flammable materials.
Mark bracket hole locations on the wall with a pencil keeping them level with the line previously drawn.
MOUNTING INSTRUCTIONS
Step 4
Place bracket over holes of anchors and attach to the wall by inserting anchor screw through the bracket into the anchors
in the wall. Repeat for all four screws.
Step 5
Using a screwdriver, attach wall spacers to the back of the fireplace in the predrilled holes using the spacer
screw. If they are already attached, insure it is on securely.