Owners manual

Installation Manual:

Part Number: 531077, 531076,

531021 & 531050

5150 Eucalyptus Avenue Unit A

Chino, CA 91710

Ford F-250/350/450 (99-14)

888.360.3696

www.anzousa.com

Completely read all the instructions before installation

Improper installation will void warranty

Step 1 Step 2 Step 3

Tools needed:

Remove the two phillips screws Carefully pull out the OEM third

Phillips Screw Driver from the OEM third brake light brake light housing from the

housing. vehicle.

Step 4 Step 5 Step 6

Remove the OEM third brake Remove the Anzo third brake Install Anzo third brake light by

light by disconnecting the power light out of its box. reversing steps 2 to 4.

source.

Step 7

Test all functions before operating

the vehicle.

AnzoUSA™ products are covered, by a limited one (1) year warranty, to be free of manufacturer’s defects. However, certain AnzoUSA™

product categories have warranty policies which differ from this standard, please contact your representative for detailed category

information. Damage due to improper installation or road hazards are not covered. Seller and manufacturers’ only obligations shall be to

replace the product proven to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or

consequential, arising out of the use of or the inability to use the product. Before using, user shall determine the suitability of the

product for its intended use, and user assumes all risk and liability whatsoever in connection therewith.