TEMPO SERIES INSTALL GUIDE Model# L-AZ026 L-AZ026BN PERFECTION IS OUR TRADITION™ v2.
TABLE OF CONTENTS Parts List Before You Start Spec Drawing Installation Care & Maintenance Warranty Registration Pg. 1 Pg. 2 Pg. 3 Pg. 4 Pg. 11 Pg. 12 Final Page YOUR REVIEWS MATTER! The ANZZI™ Family thanks you for your purchase and hopes you enjoy your very own ANZZI product for years to come! In the meantime let us know about your experience? We would love to hear your thoughts from the packaging to the quality and function of the product. Leave a review on www.ANZZI.
PARTS LIST NO . 1 2 3 6 8 7 9 10 5 4 15 11 16 12 18 19 17 PART NAM E 1 Flange 2 Shower arm 3 Shower head 4 Screw 5 6 Protect cover Cartridge locknut 7 Handle adapter 8 Cartridge 9 10 Sleeve Body 11 Check valve 12 Knob 13 14 Handle Ttrim plate 15 Joint 16 Joint 17 Joint 18 19 Screw O-ring 20 Aerator washer 21 Aerator 22 Aerator collar 23 Spout 24 Flange 25 Screw 26 Joint 13 14 20 21 23 24 25 26 22 ASME A112.18.1/CSA B125.
BEFORE YOU START Recommended Items Screwdriver Adjustable Wrench Channel Locks Teflon tape Goggles Allen key ATTENTION: Please read all instructions thoroughly including all warnings, attentions and notes before beginning installation. For any questions or concerns contact our dedicated technical support team at 1-844-44-ANZZI. PERFECTION IS OUR TRADITION™ pg.
SPEC DRAWING mm [inches] PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 1 5c 5b 5a 4 Step 1A Remove the protective covers (5a) and (5b) by turning counter clockwise and sliding them out. Step 1B Do not remove protective cover (5c) until you make sure the cover is flush with the finished wall. Step 1C Using a Philips screwdriver, unscrew and remove the two screws (4). Step 1D Now remove the remaining protective cover (5c). PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 2 Step 2A Connect all plumbing lines to the faucet valve as shown. Step 2B Make sure the hot and cold supply lines are connected to the pertaining sides. PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 3 Step 3A Turn on water and allow it to run for 1-2 minutes. Step 3B Check all connections and confirm there are no leaks before proceeding. PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 4 1 O-r i n g 2 3 1 O-r i n g 2 3 14 12 13 18 23 24 Step 4A Apply Teflon tape to the shower arm (#2) then place shower arm flange (#1) on shower pipe and screw shower arm to the pipe. Step 4B After shower arm is in place screw the shower head (#3) onto the arm. Important: Make sure the O-ring is placed in between the shower arm (#2) and the shower head (#3). PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 5 14 12 13 1 O-r i n g 18 2 3 14 12 13 18 23 24 Step 5A Put the trim plate (#14) through the faucet valve then fasten it with screws (#18) and tighten using screw driver. Step 5B Screw on the diverter knob (#12) to the valve. Step 5C Slide the faucet handle (#13) onto the mixing valve and turn body clockwise to secure it to the valve. PERFECTION IS OUR TRADITION™ pg.
INSTALLATION Figure 6 23 24 25 1 O-r i n g 2 3 14 23 24 12 13 18 Step 6A Add Teflon tape to the supply pipe. 23 24 Step 6B Using a screwdriver remove the two screws (#25) from the spout body (#23). Step 6C Place the spout flange (#24) onto the back of the spout body (#23) and secure with the two same set screws (#25). Step 6D Then place completed spout assembly onto the supply pipe and turn clockwise until fully tighten.
INSTALLATION Figure 7 FINAL Check the connections pointed by the arrows for any kind of leaks and re-tighten if necessary. Important: Please make sure not to over tighten. PERFECTION IS OUR TRADITION™ pg.
CARE AND MAINTENANCE ANZZI™ products are crafted with superior quality standards and workmanship and are engineered to stand the test of time. However, that does not mean the product can be neglected and will need some care and cleaning. It is recommended to use regular soap and hot water along with a non-abrasive cloth or sponge to regularly clean the product. This avoids any nasty build up or deposits which would be tougher to remove.
LIMITED LIFETIME WARRANTY ANZZI™ products are manufactured with superior quality standards and workmanship and are backed by our limited lifetime warranty. ANZZI™ products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. We will replace FREE OF CHARGE* any product or parts that proves defective. Simply call 1-844-44-ANZZI (1-844-442-6994) to submit a warranty claim and request an RMA.
PRODUCT AND WARRANTY REGISTRATION To register your product and activate your Limited Lifetime Warranty contact us at 1-844-44-ANZZI or email us at support@ANZZI.com. Or, if preferable, fill out the form below then scan/fax/mail us a copy. Email: support@ANZZI.com Fax: 1-866-560-1060 Mail: ANZZI™ 5701 NW 35th Ave. Miami, FL 33142 In need of replacement parts? Visit www.SpaWorldParts.com ANZZI™ Product Registration Card Name..................................................................................
Perfection is our Tradition™
