Full Product Manual
12
1. Make sure that the bottom rail is firmly attached to the threshold before screwing the wall
posts and Fixed Panel assembly together.
2. Make any final adjustments (up to 1/2”) if needed. Hold the Door Panel assembly steady
and drill the holes through the first layer of the Wall Post L [01A] and Wall Post R [01B] into
the Door Panel assembly using a 1/8" drill bit (Fig 7.1 & Fig 7.4).
3. Secure the Fixed Panel assembly with Screws ST4x8 [12] (Fig 7.2 & Fig 7.5).
4. Cover the screw heads with Screw Caps [11]. (Fig 7.3 & Fig 7.6)
Step 7
Fig 7
3
[11]
1
2
[12]
Screw
ST4x8
4
5
6
[11]
[12]
Screw
ST4x8