Full Product Manual

1. Disassemble gaskets by removing handle lever and handle knob. (Fig 9.1)

2. Install handle and one gasket on the outer surface of Door Panel [07]. Connect the handle

lever and one gasket to the handle from the other side of Door Panel [11] through the upper

hole of Door Panel [07]. Hand tighten the handle lever to secure. (Fig 9.2)

3. Connect the handle knob and one gasket to the handle from the other side of Door Panel [07]

through the lower hole of Door Panel [07] . Tighten the handle knob with an allen key to secure.

(Fig 9.2)

IMPORTANT: Ensure handle gaskets are placed on each side of glass.

Step 9

[07]

Fig 9

handle lever

gasket

handle knob