Full Product Manual

ATTENTION
.
This model requires a minimum 1-3/8" (35mm) of at level threshold space for installation.
.
Tools Required
Phillips
Screwdriver
Level Tape
Measure
Drill 1/8''
(3mm)
Drill Bit
1/4''
(6mm)
Drill Bit
100%
Silicone
Sealant
Pencil Rubber
Mallet
Safety
Glasses
Stud Finder
2
INSTALLATION GUIDE
BEFORE YOU BEGIN
This product is heavy
and may require two
people to install.
.
Use cut-resistant,
non-slip gloves to
reduce the risk of
personal injury and
to hold the glass rmly.
.
This product is heavy and may require two people to install.
Threshold must be level for proper installation.