Installation Guide

12mm
1
1
9
11
12
5
7
4
put the the notch of the glass (15) into lower fixing part (6) , lock down the cover with
screw cover (14) as shown in the picture .
5. Install the pull rod (9) on the fixed glass and leave it 12mm away from the
glass panel edge. As shown in the picture , mark position on the wall when the
pull rod (9) is horizontal. Remove the pull rod mark down scre hole position on
the wall as shown in picture 1, use a φ1 / 4” drilling to drill the hole, drive it
into the plastic anchor (12) with the screw (11) and fix.
6
14
15