Installation Guide

24. Open the Glass Door (01) and carefully set the

Stationary glass (11) aside. Remove the Wall brackets

(24) from the Stationary glass and replace it to the

outlined position to mark the hole on the wall.

Drill the hole using a Ø 5/16” drill bit, insert the Wall

anchor (13) and fasten the Wall brackets to the wall

with the Big flat head screws ST4.2×35 (15).

See Fig. 13 for details.

Fig. 13

25. Place Stationary Glass (11) back into position and tighten

it up to the Wall Bracket (24).

See Fig. 14 for details.

Fig. 14

Ø 5/16"

inner part

inside

outside

inside