Installation Guide
6
ATTENTION:
Back plate of the hinge from inside
the shower locates too close to the
drilled holes in the wall and might get
scratched with the long screws or
screwdriver.
(OPTIONAL)
4. Carefully remove back plates from the
Hinges (05) and set the Glass door (01)
aside.
Screw in rest of the Countersunk
screws ST5 x 70 (04) into the wall,
place the Glass door back to its position
and reassemble the Hinges.
See Fig. 4 and Fig. 5 for details.
Fig. 4
5. Mount the Handle (02) to the Glass door (01).
See Fig. 5 for details.
Fig. 5
inside
inside
inside