Installation Guide

8
ATTENTION;
Prior to the next step, please be sure the part of the wall for
installation of the L-shaped strip (08) is clean, dry and free
from soap, oil and any construction debris.
8. With the door closed press the Bumper strip (08) on the door
edge.
See Fig. 8 for details.
Fig. 8
9. It is the last step for Style A products.
See Fig. 9 for details.
NOTE:
If your door is more than 30” in width, you will need
to add Stationary glass panel (11):
For installation of the Stationary Glass with Support
bar, you will need to refer to Style B.
Fig. 9
14”-30” large Stationary glass
st be used for assembly