Installation Guide

1. Use the predrilled holes and the included bolts to assemble the Hinges

(05) on the Glass Door (01).

2. Put a piece of 5/8” thick timber on the bathtub. Place the Glass Door

(01) and assembled Hinges (05) on the piece of flat timber. Butt the

hinged side of the door against the wall and use your leveler tool to make

necessary adjustments to its position until it is fully level.

NOTE: The door should be leveled vertically.

3. Accurately mark drill holes on the wall. Place the Glass Door (01) aside

in a secure and safe position. Use a Ø 5/16” drill bit to drill the holes, then

insert the Wall Anchors (03).

4. Return the Glass Door (01) to is proper position. Use the Flat Head

Screw ST5x35 (04) to secure the Hinges (05) to the wall.

DETAIL A

TUB DOOR