Installation Guide
5
4. Take apart the Bottom bracket (11).
Place the Bottom bracket base into the notch
on the bottom of the Stationary glass (02)
from inside and mark the drill hole on the
threshold, tray or bathtub.
Remove the glass, drill the hole using Ø1/8”
drill bit and secure the
Bottom bracket base
with Round head screw ST5×35 (08).
See Fig. 4 for details.
Fig. 4
1
2
3
4
Ø1/8"
Inside
Outside
Fig
. 2
. 3 Draw the line on the wall according to your Shower
Place the assembled ssalg yranoitatS
( 02 )
and
on the shower base or bathtub,
butt them
up against the wall and level them vertically.
See Fig. 2 for details.
Note: Make sure the Glass panel are absolutely
vertical.
Fig
. 3
W1
door or tub door size.