Installation Guide

Notice: This assembly requires two people due to the weight of the
glass doors. Professional installers are highly recommended.
1. Carefully inspect all boxes and packages to make sure no damage
occurred during shipping. If you find a unit has been damaged, is missing
parts, or has finishing defects, contact our customer support department
within 5 business days of the delivery date.
Once all boxes and packages are inspected and opened, thoroughly read
through this instruction manual. Take time to view the “Detailed Diagram
of Shower Door Components” page and mark each piece as you ensure
all necessary parts required for assembly are included in the package.
2. Note: Keep in mind that we are not responsible for code compliance
standards for your project. Plumbing and building codes differ from one
location to another, so it is crucial to review your local building codes be-
fore installation to help answer any questions you have about installation
compliance standards.
3. For installation in a newly constructed area, be sure to install all
required drainage and plumbing before shower installation. Check local
code requirements for plumbing installation as some areas require instal-
lation by a licensed and experienced plumber.
4. Make sure the installation surface area is level, solid, and can support
the entire weight of the unit and the walls are plumb before beginning in-
stallation. Leveling adjustments and drilling may be necessary depending
on the unit being installed.
Major problems may occur if the surface area isn’t level, out-of-square
conditions exist, and installation is abnormal. It is recommended that all
primary surfaces of the unit be protected during installation. Avoid setting
the glass directly onto a tile floor.
For best protection practice, use a piece of cardboard or wood to keep
the bottom edge and corners of the glass from becoming damaged.
ATTENTION: Use caution when unpacking and inspecting your unit. For
easy part identification, refer to the detailed diagram in your manual and
lay out each piece accordingly. Do NOT discard cartons and hardware
bags until you have thoroughly checked for all parts. Contact us regarding
any missing or damaged parts.
NOTE: Keep these instructions for installation to refer to later.
GETTING STARTED