Installation Guide

4. Disassemble the Bottom Bracket (11). Insert the base of the Bottom
Bracket into the notch found on the bottom of the Stationary Glass (02)
from the inside. Precisely mark the drill hole on the bathtub, tray, or
threshold. Gently remove the glass. Use a Ø 1/8” drill bit to drill the hole
and use the Round Head Screw ST5x35 (08) to secure the base of the
Bottom Bracket.
5. Reposition the Stationary Glass (02) back into the Wall Bracket (01).
Assemble the Bottom Bracket (11).
Refer to Figure 5 for details.
ATTENTION: To prevent creating a metal to glass connection, use a clear
rubber gasket.
A
Mark
here
Ø
1
8
"
DETAIL A
GLASS BRACKETS