Installation Guide

Guarantee a longer life of the hardware finish by wiping off the metal
parts with a soft cloth after each use. Avoid using abrasive cleaners and
products especially those that contain bleach, acid, or ammonia. In the
case that these chemicals are used, thoroughly rinse the surface as soon
as possible and wipe dry with a soft cloth. Stainless-steel surfaces should
be cleaned once a week or as needed. When applying a stainless-steel
polish or cleaner, work with the grain and not against it. Avoid the use
of abrasive tools such as wired brushes, abrasive cloths or sponges, or
steel wool.
Tempered Glass: Nonabrasive bathroom cleaners and your usual glass
cleaner may be used to clean tempered glass. Be sure to thoroughly
rinse off any cleaner. Do NOT strike the glass with any hard or sharp
object as it could can cause immediate damage or cause the glass to
eventually break.
Wheel Maintenance: To keep the roller movement smooth, apply a small
amount of lubricating oil. Periodically adjust the wheel screw to ensure
the moving door slides smoothly and the bearing functions effectively.
MAINTENANCE