Installation Guide

Shower/Tub Door Installation

2. Mark the drilling holes on the wall through the holes in

the Wall bracket (01).

Place the Wall bracket aside, drill the holes using Ø5/16”

drill bit and insert the Wall anchors (07).

Apply silicone caulk along the wall profile and around the

holes on the wall.

Place the Wall bracket back into the desi gnated position

and secure it to the wall using

Countersunk screws

ST5×35 (08) .

See Fig. 2 for details.

Fig

. 2

Ø5/16"

Fig. 1

1. Assemble the Wall brackets (01 )

onto the ssalg yrnaoitatS

(02) .

See Fig. 1 for details.

Note: If the shower enclosure installed onto tile floor directly,

it is necessary to use ot ) 31(laes noitcetorp mottob ssalG

protect glass bottom conner.

Fig

. 1