Full Product Manual

12
[06]
1
[15]
TOP
Step 7
1. Position the Door Panels [06] as the figure shows. The holes of the Door Panels [06]
close to the center. (Fig 7.a)
2. Remove the Cover, Screw and Clip from the Top Wheels [15].(The Top Wheels [15]
should be hold by another screw and move up and down by turning the screw.) (Fig 7.1)
3. Install the Top Wheels [15] to the top of Door Panels [06]. The Roller of Top Wheels [15]
should be faced outside. Install the Clip to the other side of Door Panels [06] and secure it
by tighten the Screw. Install the Cover again. (Fig 7.1)
4. Remove the Cover, Screw and Clip from the Bottom Wheels [16].(The Bottom
Wheels [16] should be moved by pushing the button.) (Fig 7.2)
5. Install the Bottom Wheels [16] to the bottom of Door Panels [06]. The Roller of Bottom
Wheels [16] should be faced outside. Install the Clip to the other side of Door Panels [06]
and secure it by tighten the Screw. Install the Cover again. (Fig 7.2)
Note: Make sure there are Sleeves between the Wheels and the Door Panels [06].
Fig 7
Fig 7.a
2
[16]
Bottom
hole
Roller
Screw
Sleeve
Clip
Cover
Cover
Screw
Clip
Sleeve
Roller
Button