Full Product Manual

Step 9

1. Disassemble Gaskets by removing Handle Lever and Handle Knob. (Fig 9.1)

2. Install Handle and one Gasket on the outer surface of Door Panel [06]. Connect the

Handle Lever and one Gasket to the Handle from the other side of Door Panel [06] through

the upper hole of Door Panel [06]. Hand tighten the Handle Lever to secure. (Fig 9.2)

3. Connect the Handle Knob and one Gasket to the Handle from the other side of Door

Panel [06] through the lower hole of Door Panel [06] . Tighten the Handle Knob with an

allen key to secure. (Fig 9.2)

IMPORTANT: Ensure handle gaskets are placed on each side of glass.

[06]

Fig 9

handle lever

gasket

handle knob

[06]