Full Product Manual

11
Step 6
1. Make sure that the Horizontal Rail [02] at the bottom is firmly attached to the threshold
before screwing the wall posts and Fixed Panel assembly together.
2. Make any final adjustments (up to 1/2”) if needed. Hold the Fixed Panel assembly steady
and drill the holes through the first layer of the Wall Posts [01] into the Fixed Panel
assembly using a 1/8" drill bit. (Fig 6.1)
3. Secure the Fixed Panel assembly with Screws ST4x10 [11] and Gasket [09]. (Fig 6.2)
4. Cover the screw heads with Screw Caps [10]. (Fig 6.3)
Fig 6
[11]
Screw
ST4X10
1
2
3
[09]
[10]
Note: The flat surface of Gaskets [09] should be faced to the Wall post [01].