SHOWER DOOR INSTALLATION For models: SD-AZ45 Please Note: This is a two person job. The glass doors are extremely heavy and it is highly recommended to use professional installers. For any questions or assistance simply call 1-844-44-ANZZI or visit us at www.ANZZI.
Preparation 1. After opening all boxes and packages, read this introduction carefully. Check that all of the needed parts are included in the package, by marking all the components on the “Detailed Diagram of Tub Door Components”. Examine boxes and packages for shipping damage. If the unit has been damaged, has a finishing defect, or has missing parts, please contact our customer support department within 3 business days of the delivery date. 2.
13 14 15 17 12 1 18 19 2 20 8 3 4 5 21 6 22 7 16 9 10 11 Drawing Qty No. No. Description 1 Wall jamb 2 9 2 Wall anchor 6 10 Qty No.
1.Handle carefully with glass panel to avoid bumping, support it with wooden board, paper or foam when it is placed on floor 2. If any size deviation between base and shower enclosure : ① Check if it is wrongly installed; ② Check tilt level of enclosure against wall, ③ Contact our customer service if any problem Installation steps: 1. Installation of base: ① Lay down base; ② Check base level, keep it fully flat by padding or rubbing. picture 1 2.
. Installation of moving glass panel: ①As picture 7: install bottom roller, handle ②As picture 8: install moving glass panel 5 10 picture 8 picture 7 6. Installation of side water guard, magnetic seal ① As picture A: install side water guard, magnetic seal 4 7 picture A 7 picture A 7.Adjustment ① As picture B, after installation ,check the matching of door and magnetic seal, adjust it if any problem.
as picture 5 : 1.Fix frame into wall jamb , 2 Fix main body with ST4*25 screw and screw cap, 3.Lock vertical jamb and wall jamb with ST4*12 screw and screw cap. 3 picture 5 4. Installation of fixed glass panel: ①.As picture6: put fixed glass panel into per-assembled frame, then install rubber strip, glass fixing block,glass supporting block, finally lock glass fixing block on the guide rail with screw ST4*12 and install handle.