Installation Guide

15
Make sure there is Glass Bottom Protection Seal [21] at the bottom of
Fixed Panel [02]
and apply a good quality
Glass Bottom Protection Seal [21].
Silicone Sealant on the bottom of the
(Fig 7.1)
Install the Wall Brackets [08] back to the Support Bar [03]. Install the Fixed Panel [02]
to the Bottom Rail [15]. (Fig 7.1)
Install the Wall Brackets [08] [08] to the Wall Bracket Plate. Tighten Wall Brackets
to secure. If needed, loosen the Wall Bracket [08] on the Fixed Panel [02] side
n
for
o more than one turn so that the screw holes at the side of Wall Bracket [08] face
the wall.(Fig 7.2)
Slightly push the Fixed Panel [02] to the wall and secure the Support Bar [03] by
tighten the screws on the Wall Brackets [08]. (
Fig 7.2)
Apply a good quality Silicone Sealant on the corner of groove of the
Bottom Rail [15].
(Fig 7.2)
Install the Rail Cover [14] to the Bottom Rail [15], push it until level with the
Bottom Rail [15]. (Fig 7.2)
1.
2.
3.
4.
5.
6.
1
[08]
[15]
[02]
[14]
screw
[03]
[03]
[02]
[21]
[08
]
2
7
7