Full Product Manual

Step 4
Place the Wall Jamb [02] onto the wall.
Use drill to start the ST4x35 screw [20]
into the Wall Plugs [22] . Use a
screwdriver to hand tighten until
secure. (Fig. 5)
9
Fig5
[20]
1
Step 5
1.Carefully lay your glass panels flat on a
soft, padded surface to inspect the glass.
2.Apply a good quality Silicone Sealant on
the bottom of the Fixed Panel [10](Fig 6.1).
3.Place a thick bead of silicone along the
full length of inside of back inner corner of
Fixed Panel [10] Wall Jamb [02] (Fig 6.2).
4.Remove inside corner protector from top
of Fixed Panel [10]. Carefully, and with
assistance from another capable person,
position the Fixed Panel [10] into the Wall
Jamb [02] (Fig 6.3).
Fig6
2
[02]
[10]
3