Full Product Manual

Fig10
Step 9
1.Unscrew screw "a" and tighten screw "b". Unscrew screw "c" and "d" until the screws
not protrude from the inside surface. Keep the screws in the Wall Bracket [18] (Fig 10.1).
2.Install the Wall Bracket [18] to the Support Bar[03]. Slightly tighten the screw "d"
(Fig 10.2).
3.Attach the Support Bar[03] to the inside of the Fixed Panel [10] with the Fasteners
[13] as shown in Fig 10.3 . Ensure the Support Bar[03] is level. Use provided Allen
wrench to hand tighten.
IMPORTANT: Ensure all washers and bushings are installed as shown.
Repeat for remaining Fasteners [13] .
3
2
[18]
[13]
[03]
12
1
[18]
a
d
c
b