Full Product Manual

1
2
3
4
56
[15B]
Screw
ST4X35
Step 12
Depending on which side of the Fixed Panel [10] is installed, either Bottom Guide
(L&R)[15] will be used.For this left side opening, Bottom Guide [15B] will be shown
being installed.
Mark center guide hole location.
1.Push the button of the Bottom Guide [15] to disassemble it into part a and b(Fig 13.1).
2.Place part a into correct position against the Fixed Panel [10] and mark the hole
location (as shown in Fig 13.2).
3.Remove part a and drill a 1/4" hole for cement threshold, 1/8" hole for acrylic or wood
threshold (Fig 13.3)
4.Install a Wall Plug [22] for cement threshold(Fig 13.4).
5.Replace part a into position against the Fixed Panel [10] and attach it using Screw
ST4x35[20] (Fig 13.5).
6.Install the Bottom Guide Cap [17](Fig 13.6).
Fig13
button
a
15
b
.