Full Product Manual

Step 14
1.From inside of enclosure, carefully, and with assistance from another capable person,
hang sliding Door Panel[09] and Trolley Wheel[12] assemblies onto Support Bar[03]
(Fig 15.1).
2.Disassemble Anti jump parts [14] as shown in Fig 15.2.
3.From inside enclosure, install Anti jump parts [14] to inside of sliding Door Panel[09] as
shown in Fig 15.3. Use Wrench [21] and Allen Key 2mm [23] to hand tighten until secure.
(Fig 15.3). Turn the nut of Anti jump parts [14] by Wrench [21] to fit the rail of Support
Bar[03]
4.Install part b against the Door Panel[09] as shown in Fig 15.4 and insert back to part a.
Fig15
1 2
screw
3
In the
middle
3a
Washer
4 5
17
b
b
a