Full Product Manual

Step 15
1.Measure the distance between the Bottom
Guide [15] and the door side wall ("W1").The
length of Threshold Gasket [05] would be
"W1,subtract 1-3/16"(30mm) "(Fig 16.1).
IMPORTANT: No need for cutting if the
Bottom Rail [04] and the Threshold Gasket
[05] match the width. If they don’t, please
see Step 2.2 for cutting instructions .
2.Using a pencil or another marking tool
(such as masking tape), mark distance
"W1 " on the Bottom Rail [04],
"W1, 1-3/16"(30mm) "on the Threshold
Gasket [05] .
IMPORTANT: Double check the
measurements before cutting. Cut the
Bottom Rail [04] with a fine toothed (32 TPI)
hack saw. If needed, use a metal file to
smooth rough edges. Clean up metal
shavings. Cut the Threshold Gasket [05]
with a Tin snip. DO NOT stand on or use a
vice to hold the Bottom Rail [04] while cutting.
Fig16
18
[04] x1[05] x1
W1
W1
W1, subtract 1-3/16"
1
-3/16"
1
2
W1