Full Product Manual

2
Step 16
1. Check that the measurement from front of wall to Bottom Rail [04] is the same at one
end and the other end of Bottom Rail [04] and mark using the pencil (Fig 17.1).
2.Install the Threshold Gasket [05] as shown in Fig 17.2.
3.Apply silicone to the Bottom Rail [04] and install it against the Bottom Guide [15]
(Fig 17.3 and Fig 17.4).
4.Apply silicone to the Seal [16B] and attach to the end of Bottom Rail [04]. Make
sure the Bottom Rail [04] align with the mark(Fig 17.5,Fiig 17.6).
3 5
6
4
Fig17
19
same width
1