Full Product Manual

Step 20

1. Disassemble Handle set[11] by loosing the screws(Fig 21.1).

2. Install handles and gaskets on two side of the Door Panel[09] as shown in Fig 21.2.

The handle with screw holes face inside.

3. Tighten the screws to secure the Handle set[11].

IMPORTANT: DO NOT over tighten the screws.

Step 21

1. Apply a good quality Silicone Sealant on the

walls and threshold along the bottom profile and

wall profiles(Fig 22).

Hours

Fig21

Allow 24 hours for the silicone to

fully cure before using the shpwer.

Fig22

gasket