Instructions / Assembly

Step 10

Remove Wall Jambs[01] and drill a 1 /4"

hole at each location marked for Wall

Jamb[01] (Fig 14 ).

& ATTENTION

Wear safety glasses and cut-resistant,

non-slip gloves when drilling or cutting

to avoid risk of injury.

0 �

Fig15

Fig14

Step 11

1.lnsert Wall Plugs[14] in each hole location.

2.T he Wall Plugs[14] should fit securely into the

holes. If needed, a rubber mallet can be used to

insert Wall Plugs.

3.To reduce risk of property damage, the use of

metal hammers is not recommended. If needed,

use drill to slightly enlarge the opening of the hole.

IMPORTANT: Wall Plugs[14] MUST be used.