Instructions / Assembly

Step 18
1. Disassemble gaskets by removing handle levers and handle knobs(Fig 23.1 ).
2. installation: Install handles and two washers on the outer side of
Install gaskets and handle lever and handle knob on inner side of
Turn inner handle lever and handle knob to secure. (Fig 23.2)
3. installation: Install handles and two washers on the inner side of
Install gaskets and handle lever and handle knob on outer side of
inner handle lever and handle knob to secure. (Fig 23.2)
IMPORTANT: Ensure handle gaskets and washers are placed on each side of glass.
1
�
®
'
I




l®-
handle knob
Step 19
2


 
J.@

o@

1. Apply a good quality Silicone Sealant on the
walls and threshold along the bottom profile and
wall profiles(Fig 24 ).
 Allow 24 hours for the silicone to
� fully cure before using the shpwer.
22
Fig24
Fig23