Installation Guide

1
2
3
Fig. 13
12. Refer to Step 8 to cut the Threshold cover (14) to size if necessary. Push the Threshold
cover onto the threshold when the door is in the opened position.
See fig. 13 for details.
14. Press the Anti-water strip (17) on the vertical edges
of the Stationary glass (02) and the Glass door (05).
Also press the Bumper strip (13) on the vertical edge
of the Glass door.
Mount the Handle (06) to the Glass door.
Adjust both Door stoppers (01) to ensure that they
are positioned upright and the Glass door is in its
maximum opening and closing range. Tighten the set
screw to fasten them in place.
See Fig. 14 for details.
1
2
3
4
5
Fig. 14
10