WALL PANELS INSTALLATION & CARE GUIDE SW-AZ007WH SW-AZ8074 Have questions? Visit us at www.ANZZI.com or call us at 1-844-44-ANZZI.
Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages, read this introduction carefully. Check that all of the needed parts are included in the package by checking offthe components on the "Detailed Diagram of Shower DoorComponents".
WALL PANELS SIZE MODEL SW-AZ006WH SPECIFICATION D(in) W(in) H(in) 36"X36"X74" 36" 36" 74" W D H MODEL SW-AZ007WH SPECIFICATION D(in) W(in) H(in) 38"X38"X75" 38" 38" 75" H D W 3
Wall Panels Installation-Preparation 1. Install the 2 wall panels and seal strip together.Secure the 2walls with wing nut kit.add silicone at the junction of the 2 wall panels. See Fig. 1 for details 2.Place the wall panels on the base ,drill holes through the bottom of the wall into the base with a DIM 1/8”(3mm) drill bit and secure with screw. See Fig. 2 for details screw Screw ST4x15mm 10+2 Fig. 1 seal strip Wing nut kit 6+2 Fig.
3. Make sure the studs and drywall size is fix the wall panels. See Fig. 3 for details 4.Place the wall panels and the base on the wall and level it. See Fig. 4 for details Drywall Fig. 3 Fig.
5. Refer to the section for finished install . See Fig. 5 for details 6. Use silicone to fill the gap between wall panels and base. See Fig. 6 for details Stud Drywall Wall panel Silicone Base Fig. 5 24 Hours Wait 24 hours before using the shower Fig.
