Installation Guide

PERFECTION IS OUR TRADITION™
pg. 1
BEFORE YOU START
Before you begin, read the installation instructions below. Observe all local building and safety
codes.
Unpack and inspect the product for any shipping damages and ensure that none of the
required pieces are missing. If you find damages, DO NOT INSTALL. Contact Customer Service
at 1-866-44-ANZZI, if you need assistance or have questions while installing your towel
warmer. ANZZI™ accepts no liability for any damage to the towel warmer, wall, or personal
injury during installation.
TOOLS AND MATERIALS
Safety glasses • Tape Measure • Level • Drill • Screwdriver • Pencil
WALL MOUNT INSTALLATION
1. Attach the wall supports to the towel warmer.
2. Using a level and tape measure, determine and mark the installation location of the wall
supports. Drill mounting holes and install wall anchors in these locations.
3. Secure the mounting brackets onto the wall using the provided mounting screws.
4. Hang and adjust the towel warmer onto the mounting brackets. Ensure the towel warmer is
firmly and safely fixed.
5. Plug the towel warmer into the wall socket.
OPERATION AND MAINTENANCE
The red light indicates the towel warmer is in the on position. Always turn the power off when
the towel warmer is not in use.
Note: Fabrics that contain soap or detergent residue may show what appears to be scorch
marks. These marks are simply the discoloration of the residue.