ITEM: TW-WM104** TW-WM105** ® ANZZI TOWEL WARMER INSTALL & OPERATION MANUAL V1.0 TW-WM104** TW-WM105** DON’T WAIT! REGISTER NOW! Register your product within 90 days to ensure your product is recognized as an official purchase and is eligible for warranly coverage. Mail in the completed registry card (Pg. 2) or register online at www.swcorp.com/register.
® PRODUCT REGISTRATION* IMPORTANT: YOUR WARRANTY WILL NOT BE RECOGNIZED UNLESS THIS CARD IS FULLY COMPLETED AND RETURNED OR ONLINE REGISTRATION IS COMPLETED. 1. Register online at www.swcorp.com/register. You will be asked to fill out the same information you would in the registration card. Registering online is fast, secure and ensures we receive your information. 2. Complete, cut-out and mail the registration card below.
TW-WM104**: 20.86”*4.13”*34.25” 53*10.5*87cm TW-WM105**: 20.86”*4.13”*48.82” 53*10.5*124cm 20.86” (53cm) 20.86” (53cm) 48.82” (124cm) 34.25” (87cm) 4.13” (10.5cm) 4.13” (10.5cm) TW-WM104** TW-WM105** Need help? For technical support call 305-614-4070 or visit us at www.ANZZI.
TOWEL WARMER / Wall Mount Install Guide Need help? For technical support call 305-614-4070 ro visit us at www.ANZZI.com Before using this product. Please read the following instructions carefully and keep this pamphlet for future reference. About the product: This heated towel rail is designed for drying towels or clothes, It has a surface stabilized temperature of 40°C - 50°C (104°F - 122°F) and it used in household bathrooms and kitchens.
TOOLS 1. 2. 5. 4. 3. 6. 1.Pencil 5..”+” screwdriver 2. Hammer 3. Tape Measure 6. Leveling instrument 4. Electric Drill Accessories List 1. 2. + + 3. 4. 5. 6. 7. 8. 9. 10. 11. 1. Power cord outlet wall mounting bracket X1pc + normal wall mounting bracket X 3pcs 2. Hardwired wall mounting bracket + hardwired wall mounting plate 3. Long screw M6x45mm X 4pcs 4. Self-tapping screw X 4pcs 5. Screw expansion sleeve X 4pcs 6. Fixing block X4pc 7. Jacking Screw X 4pcs 8. Screw M3.
Installation Steps Step 1 Pass the long screw (3) through the wall mounting bracket (1) Step 2 The wall mounting bracket (1) is fixed on the vertical rod through the long screw (3), and it is noted that the side holes are facing downward toward the floor, Fix the remaining 3 wall mounting brackets according to this method. Step 3 Measure the distance of the center hole of the four wall mounting brackets installed with a tape measure to obtain the four dimensions of AB,AC,CD and BD.
Step 7 Place the four wall mounting brackets(1) of the electric towel rack on the corresponding fixing blocks (6), then tighten the jacking screws (7) with a hexagon wrench (11) and ensure that the brackets adhere to the wall surface. After that, you can plug in the plug and turn on the switch for use. Installation for hardwired Step 1 Cut the plug and take out the wall mounting bracket (1) fixed on the product near the power cord.
®