Full Product Manual

ManualsBrandsANZZI ManualsBath30 in. W x 18 in. D x 20 in. H Single Sink Bath Vanity Set in Rich White with White Vanity Top and Mirror

ANZZI BATHROOM VANITY

ITEM: VT-MRSCCT30

INSTALL & OPERATION MANUAL

V1.0

DON’T WAIT!

recognized as an ofﬁcial purchase and is eligible for warranly

coverage.

Mail in the completed registry card (Pg. 2) or register online

at www.swcorp.com/register.

Summary of content (8 pages)

PAGE 1
ITEM: VT-MRSCCT30 ANZZI BATHROOM VANITY INSTALL & OPERATION MANUAL V1.0 DON’T WAIT! REGISTER NOW! Register your product within 90 days to ensure your product is recognized as an official purchase and is eligible for warranly coverage. Mail in the completed registry card (Pg. 2) or register online at www.swcorp.com/register.
PAGE 2
PRODUCT REGISTRATION* IMPORTANT: YOUR WARRANTY WILL NOT BE RECOGNIZED UNLESS THIS CARD IS FULLY COMPLETED AND RETURNED OR ONLINE REGISTRATION IS COMPLETED. 1. Register online at www.swcorp.com/register. You will be asked to fill out the same information you would in the registration card. Registering online is fast, secure and ensures we receive your information. 2. Complete, cut-out and mail the registration card below.
PAGE 3
Need assistance? Call our technical support line at 305-614-4070 or visit us at www.ANZZI.
PAGE 4
TOOLS NEEDED Need assistance? Call our technical support line at 305-614-4070 or visit us at www.ANZZI.
PAGE 5
Need assistance? Call our technical support line at 305-614-4070 or visit us at www.ANZZI.
PAGE 6
GUIDE TO MOUNTING THE CABINET ON THE WALL 1 ATTACHING THE MOUNTING PLATE B A C D STANLEY 265 mm INSTALL THE MOUNTING PLATE AT YOUR DESIRED HEIGHT. MEASURE FROM THE EDGE OF THE FLOOR UP (10 3/8") MARK A HORIZONTAL LINE WITH THE MEASUREMENTS IN THE DRAWING, MARK THEM WITH AN X 2 INSERT 3 ANCHORS PER MOUNTING PLATE WHERE THE X ARE USING A DRILL WITH A HEXAGONAL BIT WITH THE LEVEL OVER THE MOUNTING PLATES MAKE SURE THAT THEY ARE LEVELED ON BOTH SIDES.
PAGE 7
PAGE 8