User Guide

39 Page
Normal Operaon
Owner's Guide
How to change to the High temperature mode
1. Turn off power to the remote controller by pressing the “ON/OFF” button. (Lamp is OFF to indicate
that power is off.)
2. Press and hold both the “HOT” and “COLD” buttons simultaneously for at least 5 seconds, then
make sure that “1” (or “0”) is displayed on the remote controller.
I N
OUT
FLOW
L/M
G/M
“1” is displayed for single unit.
I N
OUT
FLOW
L/M
G/M
“0” is displayed for Easy-Link System.
3. Press the “TIME” button. Make sure that “OFF” and “F1” are displayed on remote controller.
I N
OUT
FLOW
L/M
G/M
4. Press the “INFO” button. Afterward, make sure that “OFF” blinks.
I N
OUT
FLOW
L/M
G/M
5. Press the “HOT” button or “COLD” button to set display to “on”. Make sure that “on” is blinking.
I N
OUT
FLOW
L/M
G/M
6. Press both the “BUZZER” button and “INFO” button simultaneously to save the setting. Make sure that
the display is no longer blinking.
I N
OUT
FLOW
L/M
G/M
7. Press the “ON/OFF” button to exit the edit mode.
8. Turn on power to the remote controller by pressing the “ON/OFF” button again. (Lamp is ON to indicate
that power is on.)
OTHER FEATURES OF THE REMOTE CONTROLLERS
-Features available on 100112183 (TK-RE02) and 100112155 (TM-RE30)-
<Buzzer operation>
If there is a problem with the water heater, the remote controller will sound a buzzer and display the error
code to inform you of the source of the problem.
You can stop the buzzer by pressing : "any button" for 100112183 (TK-RE02)
"Buzzer button" for 100112155 (TM-RE30).
For details on the error code, refer to p. 43.
NOTE: If you want to disable the buzzer operation, press and hold the "BUZZER" button for 3 seconds or
longer. (100112155 (TM-RE30) only.)
Information mode>
You can get some information about the water heater condition by pressing :
"INFORMATION" button for 100112183 (TK-RE02)
"INFO" button for 100112155 (TM-RE30)
During the information mode, the information will be rotated by pressing the "INFORMATION" or "INFO"
button as follows:
Inlet
water temperature
Outlet
water temperature
Water
ow
Finish
