Install Instructions

4 Control module
10
User’s Information Manual
Combi Boiler control module
Figure 4-1 Control Panel
Use the control panel (FIG. 4-1) to set temperatures, operating conditions, and monitor boiler operation.
DISPLAY WINDOW
RESET BUTTON
LEFT BUTTON
RIGHT BUTTON
DOWN BUTTON
UP BUTTON
The information below shows the functions of the buttons
on the display:
MENU / ENTER = ►
SETPOINTS = ▲ and ▼
SAVE = ◄
RESET =
●
Saving parameters
To save parameters and exit programming:
Press the ► button to go to the end of the Parameter List,
then press ► again. Otherwise, the parameters will be saved
automatically after Timeout.
To enter a parameter and continue programming:
Press the ▲ or ▼ button to change parameters. Press ► to
move to the next parameter and to the end of the Parameter
List. Press ◄ to save and return to the Base Screen. Otherwise,
the parameters will be saved automatically after Timeout.
Access modes
User
Press the ◄ button.
Installer
Most parameters are available only to the installer, accessible
by entering the installer menu: Press the ► button.
ProLine® XE
Combi Boiler