User Guide
39 Page
K]}v ^v }v Z }v}oo
X
Inlet water temperature will be displayed on the
controller by pressing the /E&K button.
X
Outlet water temperature will be displayed on the
controller by pressing the /E&K button.
X
Water flow rate, in gpm, will be displayed on the
controller by pressing the /E&K button.
X
Press the "INFO" button to finish information mode.
Inlet water temperature
(EX.: 60 °F)
Outlet water temperature
(EX.: 120 °F)
Water flow
(EX.: 3.5 GPM)
-Informaon mode-
-Unit conversion mode-
When the water heater is connected with the remote controller, the temperature
controller will not operate temperature settings, as only work for the information
mode (Indoor model only).
K]}v ^v }v Z }v}oo
X
Press the KElK&& button on the controller in
order to turn the controller on.
X
When ON, the orange LED is lit.
X
The previous set temperature will be displayed on
the screen.
X
Press the "INFO" buttons for at least 3 seconds.
æX
The set temperature should now be displayed in the
alternate unit of measurement.
(EX.: 100 °F)
(EX.: 38 °C)
ADDTIONAL FEATURES
You can get some information about the water heater condition by pressing the "INFO" button. For more
information, follow the procedures below:
The controller display information can be changed from English Units to S.I. / metric units.
Please follow the procedures below:
Normal Operaon
Owner's Guide