Manifold Kit Overview

ManualsBrandsAO Smith ManualsCommercial Water HeatersDRE-80, 80 Gallon 45 KW Lime Tamer Commercial Electric Water Heater

November 2009R

MANIFOLD KITS

Commercial Electric

Water Heaters

Precision cut type "L" all copper tube manifold kits assure water flow balance of all units. Without this balance, the full water

heating and storage potential of the system cannot be achieved. All tubing, elbows and valves required for manifold construction

as illustrated are contained in the kit.

Dimensions shown are for minimum space occupied by complete assemblies. Service space in front of the units must be added.

The manifold kits are provided with gate valves to isolate units for servicing.

MODELS DVE-52,

80, 120 AND DRE-52, 80, 120,

AND DSE-65, 80, 100, 120

ALL DIMENSIONS IN INCHES

FOUR HEATERS

Part

Model Number H W D A

DRE/DVE-52 66-1/4 126-3/4 27-1/4 13-1/4

DRE/DVE-80 70-1/2 130-1/4 31-1/4 9-3/4

DRE/DVE-120 73-1/4 134-1/2 35-3/4 5-1/2

DSE-65 61-1/2 129-1/2 30-1/4 10-1/2

DSE-80 60-1/4 131-1/2 32-1/4 8-1/2

DSE-100 69-1/4 131-1/2 32-1/4 8-1/2

DSE-120 74-1/4 133 33-3/4 7

Inlet and Outlet Size - 2-1/2

TWO HEATERS

Part

Model Number H W D A

DRE/DVE-52 66-1/4 56-3/4 27-1/4 13-1/4

DRE/DVE-80 70-1/2 60-1/4 31-1/4 9-3/4

DRE/DVE-120 73-1/4 64-1/2 35-3/4 5-1/2

DSE-6

61-1/2 59-1/2 30-1/4 10-1/2

DSE-80 60-1/4 61-1/2 32-1/4 8-1/2

DSE-100 69-1/4 61-1/2 32-1/4 8-1/2

DSE-120 74-1/4 63 33-3/4 7

Inlet and Outlet Size - 1-1/2

9003429205

THREE HEATERS

Part

Model Number H W D A

DRE/DVE-52 66-1/4 91-3/4 27-1/4 13-1/4

DRE/DVE-80 70-1/2 95-1/4 31-1/4 9-3/4

DRE/DVE-120 73-1/4 99-1/2 35-3/4 5-1/2

DSE-65 61-1/2 94-1/2 30-1/4 10-1/2

DSE-80 60-1/4 96-1/2 32-1/4 8-1/2

DSE-100 69-1/4 96-1/2 32-1/4 8-1/2

DSE-120 74-1/4 98 33-3/4 7

Inlet and Outlet Size - 2-1/2

9003430205

9003431205

AOSCE15600

Page Of 2

April 2011R

Summary of content (2 pages)

PAGE 1
® MANIFOLD KITS Commercial Electric Water Heaters MODELS DVE-52, 80, 120 AND DRE-52, 80, 120, AND DSE-65, 80, 100, 120 Precision cut type "L" all copper tube manifold kits assure water flow balance of all units. Without this balance, the full water heating and storage potential of the system cannot be achieved. All tubing, elbows and valves required for manifold construction as illustrated are contained in the kit. Dimensions shown are for minimum space occupied by complete assemblies.
PAGE 2
® Commercial Electric Water Heaters COMMERCIAL ELECTRIC WATER HEATER COMPARISON TABLE 3 M ax. Approvals KW UL NS F AS HRAE 90A-1980 CSA DSE -5 DSE -10 DSE -20 DSE -30 DSE -40 DSE -50 DSE -65 DSE -80 DSE -100 DSE -120 CMC UL NS F ASME NB AS HRAE 90.1b/1992 (5 gallons) UL NSF NB ASME (20 gallons) CSA DVE -52 DVE -80 DVE -120 DVE -125 DVE -150 or DVE-Vertical DHE-Horizontal 15L 200 DVE 250 DHE300 350 400 500 600 700 800 1000 Larger units available. (See c at alog).