Product Overview
©February 2017 A. O. Smith Corporation. All rights reserved.
www.hotwater.com | 800-527-1953 Toll-Free USA | A. O. Smith Corporation | 500 Tennessee Waltz Parkway | Ashland City, TN 37015
Page 1 of 2
AOSSRG45702
DIRECT VENT DESIGN
• One-pipe, dual-channel closed system
draws all make-up air from outside the
home, eliminating problems caused by
insufficient indoor ventilation and is
FVIR compliant. Horizontal air intake and
venting on all models up to 80 inches
from outside wall with no electrical
power needed.
INTELLIGENT CONTROL LOGIC
• The internal microprocessor provides
enhanced operating parameters and
tighter differentials for precise sensing
and faster heating response to optimize
performance.
• Uses a themopile to generate the power
needed to operate the electronic gas
control without requiring an external
power source.
• The electronic gas control incorporates
an LED status indicator that monitors
system operation and service
diagnostics.
GREEN CHOICE
®
GAS BURNER
• Patented eco-friendly design reduces
NOx emissions up to 33% and complies
with low emissions of less than 40 ng/J.
DYNACLEAN™ DIFFUSER DIP TUBE
• Helps reduce lime and sediment buildup
and maximizes hot water output. Made
from long-lasting PEX cross-linked
polymer.
COREGARD™ ANODE ROD
• Our anode rods have a stainless steel
core that extends the life of the anode
rod allowing superior tank protection far
longer than standard anode rods.
PUSH BUTTON PIEZO IGNITOR
• Makes lighting pilot fast and easy with
one hand push button spark ignition.
HEAT TRAP NIPPLES
• Factory-installed for faster installation
ENHANCED-FLOW BRASS DRAIN
VALVE
• Our residential water heaters have a
solid brass, tamper resistant, enhanced-
flow, ball type, drain valve.
• Uses a standard female hose fitting that
allows for fast and easy draining during
maintenance.
• Designed for easy operation, this valve
includes an integral screwdriver slot that
features a ¼ turn (open/close) radius,
which not only permits full straight-
through water flow but also a quick and
positive shut off.
CSA CERTIFIED AND ASME RATED T&P
RELIEF VALVE
CODE COMPLIANCE
• Meets UBC, CEC and HUD National
Codes.
• Meets the thermal efficiency and
standby loss requirements of the U.S.
Department of Energy and current
edition of ASHRAE/IES 90.1
• Complies with the Federal Energy
Conservation Standards effective
April 16, 2015, in accordance with the
Energy Policy and Conservation Act
(EPCA), as amended.
DESIGN-LISTED BY CSA
INTERNATIONAL
• Certified at 300 psi test pressure
and 150 psi working pressure. Listed
according to ANSI Z21.10.1-CSA 4.1
standards governing storage tank-type
gas water heaters.
6-YEAR LIMITED TANK AND PARTS
WARRANTY
• For complete information, consult
written warranty or go to hotwater.com.
PROLINE
®
DIRECT VENT
COMMERCIAL-GRADE RESIDENTIAL
COMMERCIAL-GRADE
RESIDENTIAL GAS WATER HEATERS