Brochure

7
RESIDENTIAL GAS
Versatile Power Vent Design
• All models feature an exclusive 3-position
rotatable blower outlet which adds flexibility.
• Combined horizontal and vertical vent runs up
to 180 equivalent feet with 4” diameter venting
(ABS, PVC, CPVC and polypropylene).
• All models are equipped with a protected sensor
that detects the presence of flammable vapors
and automatically disables the burner to prevent
ignition.
• Air intake snorkel elevates the inlet location of
combustion air to prevent flammable vapors from
entering the sealed combustion chamber.
Hot Surface Ignitor
• More robust and reliable than standing pilot, and
reduces energy consumption
Built-in Heat Traps on the Water Inlet
and Outlet Reduce the Amount of Heat
Lost Through Piping
2-Inch-Thick, “Environmentally
Friendly” Foam Insulation Reduces the
Amount of Heat Loss and Contributes
to Overall Energy Efficiency
User-Friendly
• State-of-the-art electronic gas control provides
more precise temperature control.
• LED control light displays operation status and
diagnostics information.
Enhanced-Flow Brass Drain Valve
Available in Natural Gas and Propane
Code Compliance
• Meets UBC, CEC and HUD National Codes.
• Meets the thermal efficiency and standby loss
requirements of the U.S. Department of Energy
and current edition of ASHRAE/IES 90.1.
• Complies with the Federal Energy Conservation
Standards effective April 16, 2015, in accordance
with the Energy Policy and Conservation Act
(EPCA) as amended.
Design-Listed by CSA International
• Certified at 300 psi test pressure and 150 psi
working pressure.
• Listed according to ANSI Z21.10.1-CSA 4.1
standards governing storage tank-type water
heaters.
6-Year Limited Tank and Parts Warranty
• For complete information, consult written
warranty or go to hotwater.com.
PROLINE
®
XE
NON-CONDENSING POWER VENT