Brochure

6
Conservationist
®
BPD Gas
Power Direct Vent Models
80% thermal efficiency, ideal for
commercial applications and where
negative air pressure is a problem
The Conservationist
®
BPD-75 tank-type commercial gas
water heater is intended for applications such as small
office buildings and duplex apartment homes.
The BPD-75 features a power direct vent design with
a factory-installed blower. The blower permits sealed
combustion direct vent operation with separate venting
and air intake runs from outside the structure. The BPD-75
offers installation versatility by allowing venting and
intake runs up to 50 feet, using 3˝ Schedule 40 PVC pipe.
The power direct vent design also eliminates the potential
for performance and safety problems caused by negative
air pressure, which is found in many commercial applications
with inadequate indoor ventilation.
DynaClean
™
II Automatic
Sediment-Cleaning System

Specially designed dip tube directs incoming
cold water to create turbulence in the tank
to reduce lime and sediment build-up

Prolongs tank life, maintains high energy
efficiency, maximizes hot water output
Quiet Modular Blower

Built-in safety device prevents pilot or main
burner operation if blower is not operating

Blower has 110V/120V electrical system,
with maximum 2A draw
Durable Brass Drain Valve
CSA Certified and ASME Rated T&P Relief Valve,
Factory-Installed
Meets the Thermal Efficiency and Standby Loss
Requirements of U. S. Department of Energy and
Current Edition of ASHRAE/IESNA 90.1
Maximum Hydrostatic
Working Pressure: 150 PSI
3-Year Limited Tank Warranty
BTU
FIRST HOUR RECOVERY APPROX.
MODEL GAL. INPUT DELIVERY GPH/°F HT. DIA. SHIP
NO. CAP. PER HOUR RATING TEMP. RISE WEIGHT
40 100 140
BPD-75
75 70,000 117 161 64 46 69-5/8 26 352
Natural
BPD-75
75 65,000 112 148 59 42 69-5/8 26 352
Propane
All dimensions in inches
AOSCA80000 R Oct 2011 Com Catalog:108078_ResidentialFul#7A635.qxd 10/28/11 5:50 PM Page 6