Product Overview

© January 2022 A. O. Smith Corporation. All rights reserved.
www.hotwater.com | 800-527-1953 Toll-Free USA | A. O. Smith Corporation | 500 Tennessee Waltz Parkway | Ashland City, TN 37015
Page 1 of 2
AOSCE15701
COMMERCIAL
ELECTRIC WATER HEATERS
GLASSLINED TANK
• Tank interior is coated with glass
specially designed by A. O. Smith for
water heater use
HEATING ELEMENTS
• Two 6.1 KW zinc plated copper
sheathed elements are standard
STANDARD VOLTAGES
• The standard voltage is 277V single
phase
TOP MOUNTED JUNCTION BOX
CONTROLS
• Thermostat is adjustable through a
range of 120º to 181ºF with a manual
reset high temperature cutoff. The
heater is wired for simultaneous
single phase operation.
COREGARD
™
ANODE ROD
• Our anode rods have a stainless steel
core that extends the life of the anode
rod allowing superior tank protection
for longer than standard anode rods
ENHANCED-FLOW BRASS DRAIN
VALVE
• Solid brass, tamper resistant,
enhanced-flow, ball type, drain valve
MAXIMUM WORKING PRESSURE
150 PSI
FACTORY INSTALLED CSA
CERTIFIED AND ASME RATED
TEMPERATURE AND PRESSURE
RELIEF VALVE
CERTIFIED TO UL 1453 FOR
COMMERCIAL ELECTRIC WATER
HEATERS
COMPLIANCE
• Meets the standby loss requirements
of the U.S. Department of Energy and
current edition of ASHRAE/IES 90.1
WARRANTY
• 6-Year limited tank/1-Year limited
parts
• For complete information consult the
written warranty or hotwater.com
LIGHT-SERVICE COMMERCIAL
ELECTRIC WATER HEATERS
Designed for light duty commercial applications with intermittent hot water loads.